Front-end structural damage to a car

A Car Accident Guide: Types of Vehicle Collision Damage

After a collision or accident, a car’s doors may be crushed, the paint may be chipped, or the fender may be dented. Individuals in the auto body trades are taught that collision damage can be classified by structural and cosmetic damage. Some cars sustain a combination of both damage types. Find out how an accident affects the operation and safety of a vehicle and how to identify types of collision damage.

Anatomy of an Accident

Auto safety and car accident repairs have evolved in recent decades. Modern cars are designed with a crumple zone, or crush zone. Auto engineers construct special parts inside the car that are designed to be damaged, crushed and broken during an accident. A strong frame encloses the occupants, while crumple zones exist in the front and rear of the car.

When an accident happens, the crumple zones absorb crash energy and redistribute it. Crumple zones help keep vehicle occupants safe and unharmed. The first car to use crumple zones to protect passengers was the 1959 Mercedes-Benz W111 Fintail.

Hidden Damage vs Cosmetic Damage on Cars

Collisions result in different types of vehicle damage. Like a scrape or bruise, some damage is visible to the eye. Other damage, like a broken bone below the skin, is hidden inside the structure of the car and requires an automotive or auto body mechanic to evaluate it. Hidden, or internal damage, can affect a vehicle’s suspension, mechanical or electrical systems.

Cosmetic damage on cars does not affect the function or structure of the vehicle. In fact, many people still safely drive cars with cosmetic damage such as scratches, dents and dings. However, it is important to repair cosmetic damage before it progresses—for example, paint scratches can turn into rust spots that disintegrate metal over time.

Structural Damage to a Car

Collisions can harm a vehicle’s structure, or frame. Examples of structural damage include frontal damage and rear damage. In frontal damage, car hoods buckle to absorb impact, prevent windshield damage and protect the driver and front-seat passenger. Rear damage also relies on a crumple zone at the vehicle’s bumper to keep the oncoming vehicle from harming the fuel tank, trunk and backseat passengers.

An individual in the auto body trade can examine damaged vehicles for cosmetic and structural damage, while an automotive repair technician can evaluate hidden mechanical damage and determine how to make improvements. Some collision damage might be irreparable—in these cases, the owner may need to purchase a new vehicle instead of relying on car accident repairs.



Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.

 Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.


Individual in a yellow vest and helmet uses a walkie talkie for worksite communication

Effective Communication Skills for Worksites

Communication is an essential skill, no matter your trade, role or responsibility. Good communication helps you and your team work smoothly together. Poor communication at work, on the other hand, may result in wasted time and resources, injuries or stress. While it is essential to learn hands-on skills in trade school, it is equally important to learn effective communication skills. Here are four ways to decrease communication issues, strengthen your listening skills and improve how you communicate on a worksite.

Establish a Chain of Command

A clear chain of command at a worksite eliminates confusion. When you know who is in charge, or who specializes in certain tools and knowledge, you can find answers to questions and concerns quickly and efficiently. A chain of command relies on employees knowing the jobsite hierarchy, which may include:

  • Site managers or supervisors
  • Contractors
  • Architects
  • Construction workers and builders
  • Engineers
  • Electricians
  • And many more

Speak in Clear, Simple Terms

Some worksites have loud machinery, noisy tools or simply many workers communicating at once. For these reasons and more, it’s important to try to speak clearly. For clearer speech, stand taller, slow down, project your voice and place emphasis on important words. A good rule of thumb in loud environments? Watch others’ body language to evaluate if they understand what you’re saying or if they need you to simplify or repeat your message.

Develop Listening Skills in Trade School

Being a good listener is just as important as speaking clearly. However, active listening requires more than just staying silent and letting others talk! Be sure to maintain eye contact so others know you acknowledge what they have to say. Verbally confirm you understand and ask questions if you are unsure if you heard their request or directive correctly.

Trade school can help students become active listeners before they set foot on a worksite. Participating in the classroom and practicing teamwork in the shop are two ways trade school students exercise active listening skills and prepare to be successful communicators in future roles.

Learn to Communicate Verbally and Non-verbally

In addition to speaking, there are several other ways to communicate on a worksite. Emails, texting, facial expressions and hand signals are all common forms of communication in workspaces and at jobsites—whether you’re in the construction, automotive, electrical, plumbing, HVAC or welding trade. Maybe you like to use voice-to-text while you are walking or driving to your worksite, hand signals instead of shouting over noisy tools, and an alarm function on a walkie talkie if you encounter a problem. Find out how you and your team work best together by using strong verbal and non-verbal worksite communication.



Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.

Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.


A notepad with the words interview questions and a pencil on a desk

Preparing for an Interview? Here are 5 Common Interview Questions

Every interview is different, but there are a few things to keep in mind. You should take a copy of your resume and be prepared to answer questions about your education, skills or job history. While the interviewer may ask different questions depending on the position, company and role you’re applying for, some questions are more popular than others. It’s a good idea to know common interview questions—and practice your answers so you feel prepared and confident during your interview.

What are your strengths?

When you interview for a position, the interviewer may ask what makes you a strong choice. Pick one or two of your personal strengths relevant to the position. For example, you may interview for a construction position that requires the ideal candidate to have hands-on skills in construction but also be open to learning related skills in electrical, plumbing or carpentry.

If you are a curious person with a problem-solving mindset, you can talk about how this is a strength you can bring to this role. To further illustrate your strengths, tell a story about how you used your curiosity and problem-solving skills in a previous role, at school or in another setting where you excelled.

Why do you want this job?

Businesses want to interview and hire people who are passionate about the position. If you applied for a role, it’s likely you’re interested in it! Be direct with the person interviewing you—let them know why the job excites you. Identify two to three reasons you believe you are a good fit, such as, “I love working on cars,” and “I’m a strong team player who enjoys collaborating with others in the automotive garage.”

Explain to the interviewer why you want a job at their company.

Tell me about a conflict you’ve faced. How did you deal with it?

We all face challenges from time to time. While you may not want to discuss something negative in your interview, consider how your answer can showcase you in a positive way. Be honest about a conflict you encountered and stay professional when you tell your story.

Spend more time talking about the resolution than the conflict. Try to provide answers to the following questions: How did you resolve the conflict? What was your approach? What did you learn? How will you bring those skills to this job? Focus on explaining the solution so the person who interviews you can understand how you respond to challenges.

What type of work environment do you like?

Work environments vary from company to company and can depend on the nature of the position. Most entry-level positions in the trade industry occur in hands-on environments, such as construction sites, residential homes, automotive garages, or a combination of locations.

Work environments can be quiet, noisy, collaborative, self-paced, structured or laid back. Consider how you do your best work. Do you need quiet to focus? Do you prefer collaboration and conversation with others? If you interview for an entry-level trade position, be sure you know what works for you to be successful.

Do you have any questions for us?

At the end of the interview, you may be asked if you have any questions. It’s always a good idea to come prepared with two or three questions. This demonstrates your commitment and interest in the job position. You can ask questions about the position and the company. Or, ask the interviewer what he or she likes about working there—the answer may give you valuable insight into the company’s culture. With the right amount of preparation and practice, you can set yourself up for success.




*Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.

Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.


Solar panels on a house roof are a green building trend

A Guide to the Latest Eco-Friendly Home Construction Trends

Today’s homeowners have specific wants and needs. Green construction and building practices rose in popularity among homeowners and contractors over the last decade. According to the U.S. Green Building Council, eco-friendly homes are energy efficient, good for the environment and more sustainable than homes of the past. Staying up to date on the latest trends is a vital way to increase your unique value as an individual in the construction industry. Learn more about the latest eco-friendly home trends in the construction industry.

Green Building Materials

As more builders and individuals in the construction trade look for ways to reduce the environmental impact of residential homebuilding, they increasingly turn to recycled, reclaimed and sustainably sourced materials. Some homeowners appreciate green building projects that follow popular styles. Vintage, rustic and industrial design styles are widespread trends that can be achieved with reclaimed materials.

Sometimes it can be cost effective to find building materials at salvage yards and discount stores. Reclaimed wood, second-hand flooring, recycled metal and other responsibly sourced materials positively impact not only the environment but also the homeowner’s bottom line.

Energy Efficiency

Homeowners, contractors and designers increasingly look to add energy-efficient elements to their homes to save on rising energy costs and reduce harmful impacts to the environment. Some energy efficient approaches to residential home building include:

  • Solar panels
  • Energy-efficient heating and cooling systems
  • Low emissivity (Low-E) windows that block long wavelengths
  • LED lighting instead of traditional incandescent bulbs
  • Energy-Star certified appliances

According to, many energy efficient homes offer healthier and more comfortable living conditions, give off fewer greenhouse gas emissions, have lower energy bills and fewer issues with moisture management.

Water Conservation

Climate change continues to disrupt rainfall and water supplies worldwide. Many places, such as California, have struggled with extreme drought and disastrous wildfires since 2014. Plus, 2019 was the second-hottest year ever recorded—which means water supplies may continue to be in high demand.

Builders and individuals in the construction trade can consider ways to help homeowners reduce their water consumption at home, such as using smart meters for water control, installing low-pressure toilets, and opting for tankless water heaters that heat only the water you need.

Other eco-friendly options for water conservation at home include:

  • Installing low-flow showerheads and toilets
  • Designing stormwater management strategies
  • Installing green roofs
  • Planting native and adapted vegetation in place of lawns or ornamentals

Indoor Air Quality

Advances in ventilation technology can improve the air quality inside residential homes. Better air quality can mean fewer pollutants, allergens, dust and cases of asthma, as well as cost savings over time. According to, airtight insulation and efficient HVAC systems can reduce electricity expenditures and ensure the health of homeowners.

As an individual who is interested in the construction and building trade, it’s a good idea to learn about the types of HVAC systems and their long-term benefits for homeowners who want cleaner air, no odors and fewer air leaks in their living spaces. To learn more about the construction trade, explore the construction and building skills program at Apex.



*Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.

 Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.


A student works on the plumbing construction of a large pipe

Questions About Hands-on Training for a Plumbing Career

For centuries, plumbers have made modern life cleaner and more comfortable. Plumbing is one system that residential homes and commercial businesses cannot do without. Without plumbing, we would have no hot water, air conditioners, swimming pools, or flushing toilets. However, most people don’t think about their plumbing until a problem occurs and they must rely on a plumber. If you’re interested in this important trade, keep reading to get answers to some commonly asked plumbing questions.

    1. What do plumbers do?

Plumbers install, repair or replace pipes and fixtures that carry water and gas, as well as waste away from homes and businesses. Plumbers work with not only toilets, bathtubs, showers and sinks but also the piping behind the walls that ensure all appliances function.

A plumber is trained in fixtures and faucets, fittings, valves and more. Plumbers also know about the history of the trade, including concepts of plumbing and basic safety.

    1. What skills do I need to learn how to become a plumber?

If you’re interested in plumbing, you’re probably also wondering what it takes to succeed in the field. Plumbing may be a good fit for your if you identify with the following:

      • Good communication skills
      • Problem-solving skills
      • Time management skills
      • Likes to work alone or with others
      • Knowledge of safety rules

Plumbers can work alone or for a contractor or business. Many are able to drive to jobsites, bring the tools they need to complete the job, and may interact with homeowners or business owners to explain repairs or installations.

Related: Plumbing and Pipefitting vs. Electrical [Infographic]

    1. Where do plumbers work?

 Plumbers can work on jobsites in a variety of industries, including but not limited to construction; maintenance departments at schools, businesses or government buildings; and residential, commercial, or industrial sites.

Many plumbers who work in the residential sector spend time in private homes installing and maintaining water tanks, hot water systems, waste disposal systems, and environmentally friendly plumbing fixtures. No matter where a plumber works, he or she must follow plumbing rules and regulations that help keep jobsites and people safe, including wearing safety gear.

Want to find out about a day in the life of a plumbing student? Learn more on our blog.

    1. Is plumbing hard?

Some students might feel apprehensive when they are taught something new. When it comes to plumbing, training offers plenty of opportunity for understanding through hands-on learning. Hands-on training at Apex helps many students practice foundational knowledge and skills and prepares them to pursue an entry-level position in the field.

If you’re still wondering if it’s the path for you, here are three signs plumbing might be a good fit.



Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.

Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.


The word tips spelled out with wooden block letters next to glowing lightbulb

Trade School Tips: How to Be Successful in School

Continuing your education after high school is an important decision. If you’re thinking about taking your next step by going to trade school, you probably feel excited and may be overwhelmed. You may be worried about how to find the right program for you or how financial aid works. Don’t worry—take a deep breath! We can help answer your questions on making the transition from high school to trade school.

Practice Your Communication Skills

High school helps students practice communication skills by learning to write essays and give presentations. Many students interested in trade school look forward to a learning that incorporates hands-on training. So how will your communication skills help you when it comes to trade school?

You can use your communication skills to practice writing professional emails. For example, if you want to learn more about Apex Technical School, your communication skills can help you contact us to ask questions or schedule a tour of our campus. Once you arrive at Apex, you can use your communication skills to talk to our admissions team about your objectives and figure out what program best fits your interests.

As a high school student interested in pursuing trade school, you already have this important skill to help you make the decision that fits your goals—the next step is to act on it.

Take Initiative

Acting on your goals means taking initiative. Going to trade school after high school provides opportunities for you to take initiative with hands-on learning. It gives students the chance to try out tools and techniques in addition to simply reading about them in books.

Skills and attributes that often go together with taking initiative include:

  1. Leadership
  2. Confidence to try something new
  3. Being open to learning
  4. Being proactive

Taking initiative helps you take charge of your passion and your future.

Ask for Help

As a high school student, you probably asked for help many times. Whether you needed help solving a math problem, attempting a science experiment or understanding a concept in history class, you could simply raise your hand for help.

Asking for help isn’t a sign of weakness. It shows instructors, staff and other students that you’re willing to find an answer or solve a problem. We all have limitations when it comes to our knowledge and skills. Plus, everyone in trade school is there to learn new things they never knew before.

You may discover that asking for help could relieve anxiety or stress you might feel. For example, if you are unsure how to use a new construction tool in the shop, asking an instructor to demonstrate the tool for you can give you the confidence you need to complete the task at hand and be proud of the result.

Interested in learning more about classes at Apex? Contact us to get answers to your questions.




*Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.

Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.

Gasoline pumps for three octane fuel types at a gas station

5 Auto Repair Questions and Answers

At Apex Technical School, students interested in automotive repair typically come to campus with many questions. They are passionate about the trade and want to learn more, such as “How often do I have to change my oil?” and “Do I really need to read the owner’s manual?” Here are some common questions our students ask and are taught in auto repair classes.

Why do I need to read the manufacturer’s manual?

The manufacturer’s manual should always be in a car—typically, drivers store their manual in the glove compartment where they can easily reach it. This book holds instructions needed to operate the vehicle safely. Some of the most important topics covered in the owner’s manual include:

  • How and where to check fluids to obtain accurate readings
  • How to troubleshoot problems, such as changing a flat tire
  • How to set up technology, such as keyless entry or a sound system
  • How to reach ideal tire pressure with step-by-step instructions
  • How to understand warning lights on the dash

Combined with hands-on skills, knowledge of the owner’s manual helps individuals in the auto repair trade extend the life of a vehicle.

What are the different car oil types and how are they used?

Students in auto repair training are taught the different types of motor oils and how often they should be changed in a vehicle. There are four general motor oil types:

  1. Full synthetic motor oil – Ideal for vehicles that demand peak-level performance and high levels of lubrication
  2. Synthetic blend motor oil – A mixture of synthetic and conventional base oils, plus some additives for resistance to oxidation and low-temperature properties
  3. Conventional motor oil – Ideal for light-duty, late-model cars with low to average mileage and a simple engine design
  4. High-mileage motor oil – Designed for older cars with more than 75,000 miles to help reduce oil consumption, minimize oil seepage and reduce emissions

How often should I change my oil?

According to Consumer Reports, follow the owner’s manual to adhere to the oil change schedule recommended for specific cars. Modern advances in engines and oil have made the old rule of “every 3,000 miles or every three months” obsolete.

Now, many automakers have oil change intervals at 7,500 or even 10,000 miles and six or 12 months for time. Change motor oil at least once or twice a year—even if you or the driver don’t drive often. Oil must be kept fresh or it may result in shorter engine life.

What are the different types of driving?

Road conditions differ depending on where you are driving. Rural, city and highway driving have distinct features and can uniquely affect the wear and tear on a vehicle.

Highway driving:

  • Higher speeds
  • More constant speeds
  • Fewer gear changes
  • Less acceleration
  • Less braking

City driving:

  • Lower speeds
  • More variable speed (traffic)
  • More gear changes
  • More acceleration
  • More braking (at intersections, traffic lights and stop signs)

Rural driving:

  • Variable speeds
  • Inconsistent traffic flow
  • Roadway obstructions (wildlife crossings, farming equipment)
  • Poor road surfaces (potholes, standing water)
  • Hidden driveways

What do octane rates in gasoline mean?

According the Exxon Mobile, octane ratings measure the fuel’s ability to resist engine knocking. Higher octane rates indicate the fuel has more resistance to pinging, or rattling, during combustion. Located at most gas station pumps on a bright yellow sticker, octane fuel comes in three grades: 87 (regular unleaded), 89 (mid-grade) and 93 (premium).

Most vehicles use 87 octane fuel but others, such as some BMW or Mercedes models, are designed to use higher octane fuel. To determine what type of octane to put in a vehicle, check the owner’s manual.

You can learn more about how to change motor oil, check brakes and more at our school in Long Island City, Queens. Explore our automotive repair program online now.




*Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.


Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.

A student wearing protective head gear welds with steel

Common Questions About Welding Training

Welding can be an exciting path for many people. According to, more than 50 percent of manmade products require welding—from cars, planes and boats to mobile phones and more. If you’re considering pursuing a future in this exciting industry, you may have more questions than answers. And you’re not alone! To help you consider your next step forward, we gathered five questions and answers about the welding trade.

    1. What do welders do?

A welder is trained in cutting and joining metal parts. During the welding process, a welder heats two metal pieces and fuses them together permanently. There are four common welding types, including:

      • MIG – Gas Metal Arc Welding (GMAW)
      • TIG – Gas Tungsten Arc Welding (GTAW)
      • Stick – Shielded Metal Arc Welding (SMAW)
      • Flux-cored – Flux-Cored Arc Welding (FCAW)

Each welding type requires slightly different tools and techniques. For example, some welders use hand-held equipment to join two metals parts.1


    1. What skills do I need to become a welder?

Individuals who are interested in welding often ask what they need to do to succeed in this exciting field. Welding may be a good fit for you if you identify with the following traits:

      • Attention to detail
      • Safety-minded
      • Problem-solving skills
      • Communication skills
      • Sharp eyesight
      • Steady hand

Though many welders may work on a team in a shop, most spend time working on their own. As a result, welders tend to be self-motivated, hard-working people who feel satisfaction with a job well done.

    1. Where do welders work?

Welders, cutters, solderers and brazers work across a variety of industries, including manufacturing, specialty contracting, repair and maintenance, and wholesale. Some welders work in the field of automotive welding completing structural repairs on vehicles. Welders may work outdoors in a variety of weather conditions—and some welders even work on complex projects underwater or high off the ground.

Regardless of their work location or type of welding career, welders must follow important safety measures. Working with extremely hot materials and bright lights can lead to illness or injury if welders don’t follow safety rules. Proper gear, such as gloves, masks, goggles and specialty clothing, help protect against welding burns.

Still curious? Learn more about a day in the life of a welding student.

    1. Is welding hard?

 Hands-on training and practice help countless students practice welding every year. According to the Bureau of Labor Statistics, there are more than 100 welding processes available to welders today. That may sound like a lot at first. However, a trade school welding program can help students who want to enter the welding field build a foundation of hands-on skills and knowledge and prepare them for an entry-level position.

Welding is a good option for individuals who enjoy hands-on work. Here are three signs you should consider welding training. 

    1. Where can I find welding schools near me in Long Island City, Queens?

Now that you know more about welding, it’s time to get involved in this exciting field. Welding classes are available now at Apex Technical School in Long Island City, Queens, New York. How long is welding school? Our combination welding technology program gives students the opportunity to be taught hands-on welding skills in as little as seven months.


Use our online scheduling tool to set up a time to visit our campus, talk with instructors and view our welding shop.






*Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.

 Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.


A construction student uses a ruler to measure a wood plank

A Day in the Life of a Construction Student

Construction is an exciting career path for many beginners who want to use their hands to accomplish daily work and feel proud of the outcome. New construction, remodeling and renovations require skilled tradesmen and women with technical knowledge and hands-on experience. Classes focused on teaching entry-level construction, carpentry and building skills give students the opportunity to learn techniques that can be used in a variety of construction projects.

Before many students enroll in construction classes, they like to imagine what their day at trade school might be like. What will they learn? How will they spend their time? What will their instructors and peers be like? Keep reading to get ideas on these and other questions.

Learn Construction Safety and Tool Use

Students in Apex’s 900-hour construction and building skills program begin learning construction in the classroom with instructors who are eager to help students expand their interest and skills. When students walk into school, they can join their peers and prepare to be taught a combination of carpentry, electrical, plumbing, kitchen and bath remodeling.

Students learn basic theories about the trade as well as how to use equipment and follow safety procedures. In classes, students are taught safety protocols for the construction career path, including how to:

  • Wear protective clothing (e.g. gloves, boots, goggles, long sleeves)
  • Disconnect power sources when not using tools
  • Be aware of tripping hazards
  • Keep a clean, organized workspace
  • Reduce distractions

In addition to safety practices, students are taught how to use tools of the trade. It’s important to not only have the right tools in your toolbox but also the skills and knowledge to use them correctly. Students get hands-on practice with hand and power tools in the shop and can ask instructors questions when they are introduced to new tools.

Carpentry Skills and Electrical

The construction and building skills program teaches six exciting segments. Students attend carpentry classes where they get a general introduction to the construction trade. As they progress, students are taught framing for floors, walls, ceilings, windows, doors and roofs. Students also attend electrical classes where they get a basic introduction to the National Electric Code. They also learn about conductors, circuit breakers and electrical blueprints.

Plumbing and Kitchen and Bath Remodeling

Classes for aspiring builders include segments on plumbing, as well as kitchen and bath remodeling. Some topics may require students to open a book or take notes while other topics may require students to work alongside instructors and peers in the shop on projects such as drain waste vent (DWV) systems in plumbing classes and light fixtures and counter installation in remodeling classes.

Are you ready to learn more about Apex’s construction and building skills program? Schedule a tour online to visit our school, tour our classrooms and ask questions.




*Apex Technical School and its instructors are licensed by the New York State Education Department. 

Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.


A person holding a clipboard and checking under the hood of a car

What Skills Do I Need to Be a Mechanic?

The average car is made up of 30,000 parts. That number may come as a surprise for some, but for students with a passion for cars, it’s what they enjoy seeing when they open the hood of a vehicle or slide under a car in auto repair class.

Automotive repair classes give students a chance to learn about automotive theory, expand their automotive skills, and roll up their sleeves for hands-on work. Keep reading to find out more about the mechanical skills and techniques Apex students are taught in auto repair classes.


Perform Basic Car Care and Maintenance 

Some students may already know a little about the history of cars, but automotive repair classes at Apex offer students the chance to learn entry-level  knowledge and build upon it in our hands-on shop classes. Instructors teach basic theories to help students understand the engine, drive-train and other support systems.

Additionally, students are taught basic car care and maintenance techniques, such as how to read an owner’s manual, check oil and oil filters, check tires, inspect fluids, examine belts and hoses, inspect and install wiper blades, and test a vehicle’s battery.


Fix the Inner Parts of a Vehicle

Students disassemble inner parts of a vehicle to understand how pieces work together and contribute to the inner workings of an internal combustion engine and an electronic automatic transmission. Students are taught how to use hand tools to assemble and disassemble parts.

Students and instructors often discuss common engine failures and why they might occur. In addition, students learn about a car’s computer software, battery, rear axles, differentials, drive shafts, torque converters, and how fluid flows through a transmission.


Understand and Test Major Components

Learning about automotive electrical theory helps prepare students to understand and test major components inside a vehicle. While working on engines and diagnosing issues, students use knowledge about electrical energy and how it works in the electrical circuits of the car. Instructors show students how to use a digital multimeter to read voltage, resistance and amps.

Cars must have brakes that operate safely. Students are taught about how braking systems work as well as how to use tools to remove brake pads and repair brake lines.

Ready to put your passion into motion? Gain automotive skills to jumpstart an entry-level position in this exciting field. Use our online scheduler to set up a tour at Apex where you can ask questions about our auto repair training program and visit our classrooms and auto shop.




*Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.

 Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.


An air conditioning and refrigeration student learns hands-on skills from an instructor

A Day in the Life of a Refrigeration and Air Conditioning Student

Tradesmen and women in the HVAC industry work on heating, cooling and ventilation systems day in and day out. Typically, people who pursue the heating and cooling trade enjoy learning how things work. They may have a natural passion for troubleshooting and feel a sense of achievement for a job well done.

Many beginners wonder if the field is a good fit. They also wonder what a typical day is like in trade school for HVAC students. At Apex, students can expect to be taught skills and training for an entry-level position. Here are a few more things you can expect when you’re an HVAC student.

HVAC Students Study the Basics

An average day for an HVAC student begins with basic skills and theories. Students start with electrical concepts and theories used in the industry. Lessons cover a range of subjects, such as:

  • Voltage circuits controls
  • Wiring diagrams
  • Residential and commercial units

As students learn, they build upon their technical skills and knowledge. In addition to basic electricity, students are taught the fundamentals of refrigeration. Refrigerant is used in many types of cooling and heating units to help transfer heat. Students are taught about refrigerant as well as:

  • Temperature (Celsius and Fahrenheit)
  • Humidity
  • Heat flow and heat transfer
  • Pressure and refrigeration cycle

Students spend time in both the classroom and a shop setting.

Learn to Evaluate Work Sites

Refrigeration and cooling students at Apex Technical School spend time in the shop where they are taught a wide variety of safety measures and industry practices. Students are taught about the shop environment, equipment and basic skills required of HVAC technicians to service refrigerators, freezers and air conditioners.

Students learn about safety rules and dangers to watch out for, including:

  • Electrical risks
  • Chemical hazards
  • Equipment temperature
  • Slippery surfaces
  • Proper tool use

Avoiding accidents is necessary to keep yourself and others safe and unharmed in the work environment.

Work on Residential and Commercial Appliances

Refrigerators, freezers and air conditioners are widely used in areas such as residential homes, office buildings, schools, restaurants and other commercial establishments. Students in HVAC school are taught how to apply electrical and refrigeration theory by working hands-on with appliances in the shop. Instructors help students use tools and diagrams necessary for some hands-on installations and repairs.

Students also spend a portion of their day working next to other students. This helps reinforce a teamwork mindset and provides opportunity for collaboration and peer support. Knowing how to work independently and with others is often a sign of a productive, dedicated tradesperson—and many entry-level employers seek out employees who can work collaboratively.

Discover more about the air conditioning and refrigeration program when you schedule a tour online.


Want to learn more about electrical? Explore the Electrical program at Apex.



*Apex Technical School and its instructors are licensed by the New York State Education Department. 

 Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.


Three colorful sticky notes with tips for coping with school stress

Tips for Stress Management in Trade School

Everyone feels stressed from time to time. Stress shows up differently in different people—and for different reasons. Some people lose focus when they take a test, while others get shaky hands when they speak to a large group of people.

So, what is stress? How does it affect your health? What can you do to manage stress while you’re in trade school? Keep reading to learn how to recognize symptoms and manage stress.

Signs and Symptoms of Stress

Stress affects your physical and emotional health, as well as how you think and behave. A little stress every now and then is OK.

However, when stress lasts for weeks or months, it can cause high blood pressure or anxiety. It’s important to recognize stress so you can manage it. If left unchecked, stress can negatively impact your education, health and goals. Some symptoms of stress include:

  • Low energy
  • Headaches
  • Upset stomach
  • Tense muscles
  • Insomnia

Stress affects people on an emotional level, too. You may feel frustrated and overwhelmed, or you could feel lonely and depressed.

Some Causes of Stress

Pursuing your technical education at trade school is an important decision. Students are excited to learn hands-on skills for an entry-level position. The journey to reaching your goals may include some stressful road bumps along the way, but if you can identify them early you can find mechanisms to help cope with stress. Some things that can cause stress in life, include:

  • Deadlines
  • Poor time management
  • Difficulties with personal relationships (e.g. splitting up)
  • Balancing work, family and school

Coping with Stress

If you’re feeling stressed on your way to school, in class or even at home, try a few simple tips to relieve the tension. Give yourself a break, text a friend, eat a snack or take deep breaths to clear your head. Try to incorporate the following habits into your routine:

  • Stay organized
  • Practice good time management
  • Create a good workspace at home
  • Develop better sleep habits
  • Exercise regularly
  • Talk to someone you trust

Finally, if you’re feeling stressed, remember to look at the bigger picture. You’re pursuing a trade and taking the next step for yourself—that’s exciting! You can use this knowledge to motivate you and keep you moving forward in the classroom, the shop and in life outside the school’s walls.


*Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.

Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.


Hands-on auto repair students stand under a car and learn to replace parts

A Day in the Life of a Student at Auto Repair School

What do students do at auto repair school? What can you expect to be taught from instructors? If you’re asking these questions, you may want to take a closer look at an average day in automotive repair class. Students who study the automotive repair trade often have a passion for cars. They bring that passion with them each day they enter the school.

Students pursuing mechanic training at Apex split their time between the classroom and auto shop where they get hands-on experience to use in an entry-level position. Check out three ways auto repair students make the most of an average day at Apex.


Acquire Knowledge of Auto Repair Tools

Learning starts with gaining knowledge of important tools. Mechanic students are taught about automotive tools and how tradespeople use them on the job. Apex students practice with tools throughout training. Tools include, but are not limited to, the following:

  • Combination wrenches
  • Ratchet wrench and set of sockets
  • Digital multimeter
  • Allen wrenches
  • Punches
  • Window sticker scrapers
  • Torx set
  • Regular and Phillips screwdrivers
  • Pliers


Roll Up Your Sleeves in the Automotive Shop

Instructors teach students how to use tools by giving them the chance to use them hands-on in the shop. As a student in the program, you practice hands-on auto repair techniques such as changing oil, testing major components when a vehicle breaks down, and working on engines, transmissions and brakes. When students put their passion to work in the shop, they learn to work with peers and help vehicles operate safely.


Learn Automotive Safety

Working on vehicles can be fun, exciting and fulfilling. However, mechanic students training in automotive repair classes also devote time to safety precautions. Proper techniques, rules and gear are designed to keep everyone safe. Students learn to:

  • Keep work areas clean and organized
  • Put tools away in work cabinets or toolboxes
  • Ensure walkways stay clear
  • Wear well-fitting clothing
  • Wear goggles and gloves when making certain repairs
  • Keep fire extinguishers nearby for emergencies

As soon as they start training in the shop, students learn to prioritize their well-being and the safety of others. At Apex, our students and instructors enjoy establishing guidelines, rules and safety measures that promote learning.

Does automotive repair school sound like a good fit? Go online to schedule a tour to visit the school, get more information and see our auto repair shops.


*Apex Technical School and its instructors are licensed by the New York State Education Department. 

Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.

Block letters spell the word "learn" below a lightbulb

3 Important Life Lessons to Learn in Trade School

Trade school gives students practical, hands-on learning opportunities, such as how to use tools and how to work in a shop with peers. Many students don’t realize they can use trade school lessons in life outside the school’s walls. How can trade school offer valuable life experience? Check out these life lessons you may learn in trade school.

  1. Expand Your Skills and Knowledge

  2. A technical school education is an opportunity to expand your skills and knowledge. Classes are often designed to offer industry information, theories, trade history and skills for entry-level employment. Students’ commitment to trade school demonstrates the willingness to welcome new information and work through questions to find answers. When you follow your passions in school, you’re learning to keep an open mind and expand your knowledge. Open-minded individuals often listen to information and figure out if it makes sense or requires another solution. This can be helpful when making decisions about various circumstances in life.


  3. Prioritize Safety

  4. Trade school gives students a chance to learn how to make their way around a shop. In the shop, students are responsible for learning techniques and skills, as well as taking safety precautions. Students are taught to use tools correctly, wear protective gear and watch out for situations that may be harmful to themselves and others.

    When safety is the expectation at school, students may learn to bring home a safety-minded attitude. A good safety attitude is the best way to protect yourself from accidents. When you respect policies and best practices, you do your part to keep yourself and others safe—whether you’re at home, at work or in a public space.

  5. Collaborate With Others

  6. As you are taught technical skills, you work shoulder to shoulder with peers. This approach encourages you to get to know and rely on each other.

    Collaboration skills not only help you learn together with peers at school but could also help you maintain patience and see another perspective. These skills are often valuable to relationships with parents, siblings, partners and children. Whether you’re helping your child learn to do his chores or installing plumbing pipes in a bathroom, you reap the benefits of collaboration.

Want to learn alongside students who are passionate about the trades? Find a program that matches your interests at Apex Technical School.



*Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.

Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.

An Apex student wearing a green shirt learns to repair a plumbing fixture in a plumber training class

Plumbing & Pipefitting Training: A Day in the Life at Apex

While a plumber may be a craftsperson who brings a toolbox to fix leaks and unclog toilets, he or she can also play an important role in the safety of residential, commercial and public spaces. Plumbing school programs help beginners kickoff this exciting career path by growing their knowledge and skills in the field.

On a given day in plumbing school, students work side by side in the classroom and shop to learn theories, skills and standards of the trade. Keep reading to learn what an average school day is like for plumbing students at Apex.

Your Plumbing Tools List

Students attending plumbing school start their education with tools. At Apex Technical School, students work with tools in their program either at the time of enrollment or as they progress in their training. The toolkit helps students learn how to use basic tools and discover which items they need to carry with them to any jobsite, including:

  • Hammers
  • Screwdrivers
  • Plumbing pliers
  • Tape measure
  • Plumbing wrench
  • Flashlight

To learn more about plumbing tools and their uses, read Common Tools for the Plumbing Trade.

Plumbing Safety

Safety is critical to a plumbing student’s education. Students learn the importance of safety in the plumbing trade. Apex plumbing students work closely with instructors who help them understand building safety codes and blueprints.

Students also wear safety protection while working in various environments. Trade school gives students in the pipefitting and plumbing program the chance to practice basic skills while wearing safety protection and following safety measures.

Fun fact: Ancient Romans were great at plumbing! Learn more about the history of the plumbing industry.

Hands-on Plumbing Training

Individuals in the plumbing trade may play a role in many commercial and residential installations. Beyond toilets and faucets, some advanced plumbers install the oxygen patients receive in operating rooms, dental chairs, decorative fountains, gas ovens in restaurant kitchens and much more.

Many students in the plumbing industry start their journey by taking hands-on courses that prepare them for entry-level work. Students who attend Apex practice in real time, in a shop setting with instructors and peers. At the end of the day, students can go home feeling a sense of accomplishment.

Want to learn more about plumber training at Apex? Visit our campus to meet staff, tour classrooms and shops and ask questions.



*Apex Technical School and its instructors are licensed by the New York State Education Department. 


Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.


An individual wearing sneakers stands on a blue floor with white arrows pointing in all directions

Why Go to Trade School?

Figuring out your future isn’t easy. If you’re considering trade school, it’s important to understand what a technical education offers. Trade schools provide the benefits of a specialized  education and can be a faster route to entering the workforce. The trade school environment can be an enjoyable experience for students who like to learn hands-on. To help you determine a path that’s right for you, let’s explore the advantages of trade school.

  1. Time

  2. Trade school focuses on the essentials—including theories, basic skills and industry skills. Students who are looking for a direct route to a technical education should consider a trade school. On the other hand, two-year degree-granting community colleges and four-year universities can be a longer commitment and may require students take unrelated elective courses—for example, history or English.

    Two- and four-year colleges may not be a good fit for students looking for a direct route to practical training. Depending on your program, lifestyle, schedule and other factors, you could finish trade school in as little as seven months.


  3. Smaller Classes

  4. Small classes can be a benefit of trade school. Classes are smaller than classes held in large lecture halls at a college or university. The close-knit environment at trade school helps you get to know instructors who teach theories and guide hands-on learning. Additionally, trade students in small classes get to know each other, learn new ways of problem solving and establish a strong support network. Some students keep in touch with their peers after completing their program as they pursue an entry-level position in their chosen industry.


  5. Hands-on Learning

  6. Everyone learns differently. Some students are auditory learners, meaning they learn new information best by hearing it. Others are kinesthetic learners who thrive by learning hands-on. These learners prefer to try a task for themselves to fully understand and remember it. Both styles are available to students who enroll in a trade school program. Are you a hands-on learner who is excited to get out of the classroom, practice in the shop and start entry-level work after training? If so, trade school may be a good fit for you.



*Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.

Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.

An electrical instructor shows a student how to take electrical measurements in shop class

A Day in the Life at Electrical School

Electrical programs help beginners in the electrical trade learn the basics for a fulfilling path in an exciting industry. From learning how to install a switch or an outlet, to finding a loose neutral in a wiring circuit, your days in an electrical school are spent obtaining skills that can help you grow your knowledge in the electrical field.

The average time in Apex’s electrical program involves splitting your time between both theory class – where you’ll learn about electrical theory, past methods and basic fundamentals – and shop class, where you’ll get hands on experience and tips of the trade to use in an entry- level position.

Meet the Instructors

Once students enroll at Apex, they meet their day to day instructors. These individuals have experience in the electrical trade and will introduce students to the concepts and practices of the trade. Instructors take the time to support students and give them space to practice wiring, splicing, grounding and the proper use of over current protection devices.

Tools of the Electrical Trade

Day-to-day learning in an electrical school involves knowledge of industry tools and equipment. Trades people use a variety of trade tools to complete the task at hand, including, but not limited to:

  • Digital multimeter
  • Tape measure
  • Conduit bender
  • Wire stripper
  • Wire crimper
  • Screwdrivers
  • Pliers

Basic tools are required to perform installation, repairs and routine maintenance. Instructors teach students the proper use and handling of electrical tools by giving them the opportunity to practice using tools in the shop with their peers. Students will also learn which tools they should keep on hand in their toolbelt at all times on jobsites.


Discover more about the electrical program when you visit the Apex campus. Contact us online for a tour.



*Apex Technical School and its instructors are licensed by the New York State Education Department. 

Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.


Woman with a white hard hat holds a blueprint on a construction jobsite

Why Are Skilled Trade Jobs for Women an Excellent Choice?

Women’s contributions to the U.S. labor force are vast. Traditional occupations have changed since women began entering the workforce in large numbers during World War II. As the country continues to blur the lines between gender roles at work, women thrive more than ever. However, women are still underrepresented in male-dominated trade industries.

Education is an opportunity for women to get their foot in the door and succeed in a trade they’re passionate about. What trade programs are a good match for women looking to learn a new skill or refine their knowledge? Check out seven trades for women now.

Residential Service Trades

Strong women across the country are supporting their households, whether they work outside the home, as a full-time homemaker or both. Women trade workers have the unique opportunity to connect one-on-one with women customers in the home who make financial decisions for themselves and their families. According to, women drive 70–80 percent of consumer purchasing. They influence a lot of decisions in a household and are often home at the time of repair or installation, especially in the following industries:

Plumbers may work long hours on a commercial construction site or install water heaters in a residential home. Whatever the job calls for, plumbers don’t back down from the challenge. Women looking to enter the plumbing trade learn to use tools and technologies to solve problems on the jobsite.

Heating, cooling and ventilation help keep indoor spaces comfortable. The industry also includes refrigeration systems, electrical controls and heating systems. Individuals in the HVAC trade are diligent workers with the skills to resolve problems efficiently.

Workers in the electrical field install, maintain and repair power and lighting systems in homes and businesses. The trade requires concentration, attention to detail, and adherence to best practices. Women who enjoy troubleshooting and problem solving may find fulfillment as electricians.

Automotive Trades

As more women choose an automotive education, their visibility and presence help change the industry for the better. In fact, women have been involved in the auto field for decades. Mary Anderson invented the windshield wiper in 1902 and Florence Lawrence invented the turn signal in 1914. Today, female mechanics make an impact in auto collision repair shops and automotive garages across the country.

Auto body repair workers improve the appearance of cars damaged by things like collisions, age or rust. They specialize in making cars safe to drive again, as well as fixing cosmetic flaws. With the help of computerized systems, auto body workers mix and apply fresh paint.

Automotive repair technicians help customers who need structural and mechanical maintenance on their cars. They fix the inner parts of vehicles that have broken down and perform oil changes and other basic car maintenance. Women who want an active, hands-on career path may find auto repair is a good match for them.

Building and Crafting Trades

Women who feel more suited to field work than to a desk may add unique strengths to a construction crew.  New technologies, tools and equipment mean that these trades are as detailed as they are hands-on.

Individuals in the construction trade build things with their hands. They work hard in residential, commercial or government settings to erect office buildings, homes, schools and more.

Welders use focused concentration, a steady hand and time-tested best practices to enhance, repair or create projects. This field holds potential for women who are strong team players and efficient when they work alone, too.

Why is learning a skilled trade an excellent choice for a woman? Potential entry-level employers are looking for proficient individuals with training. Learn how you can start your journey to learning a trade today by exploring programs at Apex.



*Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.

Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.

Three New York City construction workers wearing white hard hats and reflective vests

Choosing a Trade: Construction in NYC

New York City is full of incredible views, culture and opportunities. It’s difficult to image a world without America’s most iconic city. Each person who lives, works and visits New York City leaves a unique mark on the community—especially those who dedicate their skills and sweat to crafting the buildings that make up the Big Apple.

It’s true—commercial construction workers have found many reasons to pursue their trade in New York. Can you see yourself pursuing a construction future in the city that never sleeps? Here are three benefits of working in the construction trade in New York City.


    1. The city depends on your skills to grow.

New York City neighborhoods need skilled individuals to build offices, schools, roads, hospitals and skyscrapers. Construction projects bring new life to communities by creating infrastructure and economic opportunities for the people who live and work nearby. Individuals in the construction trade also contribute important skillsets that help New York City flourish as a tourist destination by helping erect museums, monuments, shopping centers and public transit facilities. Students who study the residential or commercial construction trade can help expand the development in their city.

    1. You can leave your suit and tie at home.

Do you prefer steel-toe boots to polished loafers? Do ties and stiff collars sound like an uncomfortable uniform? For many construction-minded individuals, formal clothing is unnecessary. New York City construction workers don’t iron their 9 to 5 work clothes each morning, but they do suit up for a hard day’s work. They may wear safety goggles, hard hats, protective footwear, reflective vests and other protective workwear. In New York City, safety is a priority—especially in high-traffic areas, on high-rise jobsites and around pedestrians and heavy machinery.

    1. Hands-on work is satisfying.

Construction projects in New York City—think skyscrapers, roads, bridges, restaurants and apartment buildings—need skilled individuals who enjoy working with their hands.  In the construction trade in New York, craftsmen often don’t sit at a desk in an office building all day. They work with their hands and operate equipment. There are several famous construction workers who contributed to New York’s skyline and structures.

Interested in gaining construction skills for entry-level position in New York City? Contact us to schedule a tour, view our classrooms and ask questions about the construction program.



*Apex Technical School and its instructors are licensed by the New York State Education Department. 


Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.

A blue wall with a clock and calendar representing time management in trade school

How Trade School Students Find Success at School

Trade industries are powered by skilled individuals. What do those individuals have in common? Without work ethic, tradesmen and tradeswomen in fields such as construction, electrical, automotive and many others would fall short of their potential. Being proud of your work ethic starts with learning how to balance what you want to do with what you need to do.

Trade school is an ideal time to practice working hard and making the most of each day. Here are three ways you can manage your time to find success at school.

Try Proactive Learning

Trade school gives students the opportunity to learn new skills and practice them hands-on. The more hands-on practice students have, the more skills they retain over time and the stronger their critical thinking muscles become.

Time management is one way to help you be a proactive learner, or someone who is dedicated to taking initiative. Try making a to-do list that will help you balance school work along with your other responsibilities. Take advantage of each day in trade school and try the following proactive learning tips:

  • Keep an open mind
  • Ask questions and seek out information
  • Practice new techniques
  • Set aside time for studying at home

Network, Network, Network

Making connections is another way to make the most of your time in trade school. Trade school is an ideal place and time to form relationships with peers and instructors who not only help you reach your goals in school each day but also offer support when you’re pursuing entry-level employment or later in your career.

Networking may seem difficult at first. If you want to talk about a welding technique, you may need to stay after class to meet with an instructor. A small conversation now has the potential to build up your professional network later. Because you took the time to network, your instructor may be willing to speak to potential employers about your work ethic, character and passion for welding.

Learn How to Balance Your Day

When you have too much on your plate—think family responsibilities, trade school, a job, sports, hobbies and friends—learning how to balance your day is essential. Time management helps you stay on track, prevent distractions and say “yes” to the important things.

Time management isn’t just looking at your calendar and arriving to class on time. It involves learning how to make the most of each day, balancing what you need to do with what you want to do, and finetuning your work ethic along the way. Apex instructors and staff want to help you achieve your goals. Contact us today to learn more.




*Apex Technical School and its instructors are licensed by the New York State Education Department. 

 Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.

A welding student wears protective gear and learns to use welding tools

A Day in the Life of a Welding School Student

Welding programs are a top choice for those thinking about going to trade school. In welding classes, students learn how to use welding tools, follow safety regulations and best practices, and gain fundamental skills for an entry-level position.

So, what is the average day like for a student in welding school? Individuals may be interested in welding school but unsure what to expect once they enroll and begin classes. Some may wonder, “Will welding be a good fit for me?”, “What do welding students learn in class?” or “Can I make welding classes work in my busy schedule?” If you’re asking these questions, keep reading to learn more about starting a welding program.

Safety First

Students at Apex choose day or evening classes. Many students need to balance school with a job, family and other responsibilities—and having options when it comes to class times helps students stay on track to meet their goals. Whether they choose day or evening classes at Apex, students learn that safety comes first, especially in the welding shop.

Putting on protective gear is one of the first things students do when they start shop for the day. Individuals in the welding trade must protect themselves from open flames, loud noises and heavy materials. This may include:

  • A welding helmet
  • Safety goggles
  • Long sleeves and pants
  • Flame-resistant welding jacket
  • Welding gloves
  • Work boots
  • Earplugs

Welding Basics

Learning the ‘why’ behind the welding trade is just as important as learning how to weld in the shop.  At Apex Technical School, students walk into the classroom and learn about gas and electric welding processes, manual and automatic cutting techniques, blueprint reading for metal layout and fabrication, including welding thin through thick metals, exotic metals, pipe welding and tube welding. Welding classes at Apex include:


  • Blueprint Reading and Fabrication
  • Oxyacetylene Welding, Cutting and Brazing
  • Basic Shielded Metal Arc Welding (SMAW)
  • Gas Metal Arc Welding (GMAW)
  • Gas Tungsten Arc Welding (GTAW)
  • Advanced Shielded Metal Arc Welding (SMAW)


Welding students at Apex spend more than 50 percent of their time in the shop with instructors who share their knowledge of welding best practices.

Tools of the Welding Trade

Students pursuing the welding trade may encounter a variety of tools and equipment when they attend a technical school. Some days, students use tools they may be familiar with, such as tape measures, hammers and wrenches, while other days they must learn how to properly use stick welders, gas cylinders, welding wire and spool guns. Instructors help students hone their skills by using tools of the welding trade in the shop.

Still wondering if welding is the path for you? Contact us today to schedule a tour to visit the school and get more information about our programs.


*Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.

Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.

A HVAC technician tests a thermostat for air conditioner problems

What Are Common HVAC Problems in the Summer?

Across the country, temperatures begin to heat up in May, June and July. Homeowners and commercial businesses rely on air conditioning to keep indoor spaces comfortable and cool. However, sunny days bring problems for A/C units that must work overtime all summer long. In fact, technicians who work for HVAC companies may find themselves facing a few common problems. Learn about summer air conditioner problems and how an individual in the HVAC trade solves them.

Low Air Flow

The summer sun helps grass, shrubs and vegetation flourish. While that may be good news for homeowners, it spells trouble for air conditioning units. Overgrowth around an A/C unit causes overheating and inefficient air flow. Upon inspection, air filters may be consistently dirty, especially when foliage grows on or near the unit and prevents air flow.

Low air flow and dirty filters lead to dirty coils. Homeowners should maintain their lawns and keep all overgrowth to a minimum near A/C units. HVAC technicians clean dirty coils and provide the maintenance necessary to keep an air conditioning system running effectively.

Capacitator Failure

Capacitator failure is another reason an air conditioning unit shuts down in the summer. Like a rechargeable battery, the start capacitator and the run capacitator supply energy to start the motor and keep it running. Capacitators are vulnerable to overheating—especially if the unit is running too hard, too long or short cycling.

A capacitator is part of the unit’s electrical system, and when it overheats, wears out or experiences a power surge, the air conditioner malfunctions. Individuals in the HVAC trade can replace a capacitator with a new one because they have knowledge of electrical systems. Malfunctioning or broken capacitators that aren’t repaired or replaced right away can lead to costly expenses.

Low Refrigerant Charge

Refrigerant is an essential component to an A/C unit. It works to dehumidify the air by absorbing indoor heat. Refrigerant starts as a liquid, changes to a gas then turns back to liquid. This process repeats continuously to ensure heat is absorbed and the air stays dry and cool. However, sometimes in its liquid stage, refrigerant leaks from the A/C coils.

When refrigerant is leaking, individuals in the HVAC trade usually discover that a low refrigerant supply is the culprit. Technicians repair and test the system to ensure the refrigerant is circulating properly and maintaining a stable temperature in the residence or commercial building.

Maintenance is important to keep air conditioners running efficiently during the hottest months of the year. However, issues may still occur for HVAC systems running around the clock. The good news is most air conditioner problems can be prevented or repaired by an individual in the HVAC trade. Apex offers students the entry-level knowledge and skills they need to diagnose summer heating and cooling problems. Learn more about the Air Conditioning and Refrigeration program at Apex, including classes on residential and commercial appliances, electrical and more.


*Apex Technical School and its instructors are licensed by the New York State Education Department.

Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.


An auto body trade school student learns to paint a vehicle with custom car paint colors

How Automotive Paint Shops Mix Custom Car Paint Colors

Auto body shops specialize in repairing damaged cars. In addition to making vehicles safe to drive again, a body shop’s goal centers on revitalizing and fixing cosmetic flaws. Accidents, rust and age often require skilled trade workers to apply a fresh coat of paint. With the help of computerized systems, individuals in the auto body trade create custom car paint colors to match any original shade. Learn more about how computers help auto body shop workers with the car paint matching process.

Car Paint Matching Codes

Paint codes are specific digits that represent a vehicle’s paint color. Without the paint code, individuals in the auto body repair industry could apply the wrong shade during large restoration projects or small touch ups. To avoid choosing the wrong shade, auto body technicians can locate the paint code, which is typically provided in the driver’s side door jam.

The paint code, along with the car’s model and year it was produced, gives individuals in the auto body repair trade the information they need to enter into the car paint matching computer.

Identifying the Variant Color

Locating the paint code is just the first step. Next, workers determine the variant of the color. What is a variant color? There are often multiple variations, or shades, of a color. These can differ from batch to batch, or across different paint suppliers.

Blending the Match

After the computer determines the variant color, workers mix the paint and spray a sample on a test card. The test card is compared to the vehicle’s color. If the colors match, auto body technicians get to work painting the car with a fresh coat of paint. They carefully blend the new paint into the old paint. Color is blended into surrounding areas. When the automotive paint dries, the new color will be indistinguishable from the old color.

Auto Body Repair Classes

Students at Apex Technical School learn to improve a vehicle’s appearance. They use paint and welding techniques to restore cars damaged by rust and age. Students also learn to fix structural, safety and cosmetic issues such as dented doors and bumpers. If you have a passion for cars and want to pursue your goals in trade school, visit Apex to learn more. Schedule a tour to see our auto body shop, meet our friendly staff and observe students in class.


*Apex Technical School and its instructors are licensed by the New York State Education Department.

Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.


A student wearing brown shoes learns about trade school program myths

3 Myths About Trade School Programs

It’s no surprise that traditional college isn’t for everyone. Millions of students attend college every year, while countless others choose to pursue their goals at a trade school. This is an important, life-changing decision for many individuals and getting it right requires careful consideration.


Choosing to go to trade school over college is a viable option for many reasons. However, as you think about your goals and interests, it’s important to understand the benefits of a trade school education and know how to spot common trade school myths. Here are three trade school myths to debunk before you enroll in technical training classes.


    1. Myth 1: There are only a few trade school options.

Welding, electrical and plumbing are well-known trades might be viewed as the backbone of the labor workforce. These trades help keep America’s homes, buildings and machines running smoothly. Many trade schools focus on providing students with entry-level skills and knowledge in these three industries—but they don’t stop there.


In addition to training in the plumbing, welding and electrical trades, trade schools may offer a variety of important coursework and shop experience for students such as:


      • Auto body repair
      • Automotive service and repair
      • Air conditioning, refrigeration and appliance controls (HVAC)
      • Construction and building skills


Trade school students don’t need to feel stuck or pressured to pursue a trade they aren’t interested in. Many trade schools, like Apex, offer students a variety of quality, hands-on programs to choose from. To find a career path you’re passionate about, you might start by exploring classes in each Apex trade program.


    1. Myth 2: Potential employers don’t want to see trade school programs on a resume.

By completing a trade program, you show you’re ready to start an entry-level trade school job. Because technical training involves a mix of classroom and shop learning, students are exposed to a well-rounded and hands-on approach to learning. An educational experience like this sharpens your skills and preps you with knowledge you can carry with you anywhere your goals take you. Plus, hands-on career readiness shows employers you’ve practiced for the role of an entry-level employee.


    1. Myth 3: Trade schools can’t obtain accredited status.


Another trade school myth involves accreditation, or proof that a school or institution meets strict – standards. Being granted accreditation means a school follows best practices for student success and continually finds ways to help students on their educational journey.


Like four-year traditional colleges, trade schools can receive this designation from accrediting organizations, including the Accrediting Commission of Career Schools and Colleges which is recognized by the United States Department of Education. Just like many traditional colleges, accredited trade schools can also obtain special licenses and memberships that contribute to a quality learning experience.


Now that you’ve debunked some myths about trade school, learn if Apex is a good fit for you in this infographic. Have questions? Schedule a tour to visit the school and talk to our friendly staff.

Learn more about our programs today.



*Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.

Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.


An auto body repair student prepares a car for painting

4 Signs Auto Body Repair School Fits Your Goals

If I start trade school, which trade should I pursue? Is repairing damaged vehicles the right path for me? Do my interests and strengths align with restoring, painting and welding cars?


Millions of cars, trucks and other automobiles travel America’s roads every day. With so many vehicles on the road, accidents are inevitable. Fortunately, individuals in the auto body repair trade play a key role. They help ensure damaged cars are fit and safe for travel again. If you’re interested in cars and maintaining their appearance, you might consider auto body training classes. To learn more, explore these four indicators.


    1. I am a good listener.


You are an active listener—you invite people to share their opinions and concerns with you. – You ask questions to help you understand someone else’s perspective. By focusing on helping others when they come to you for support, you are able to build trust and respect.


Students learning auto body repair techniques work closely with peers and instructors in the classroom and body shop. They not only practice communication with coworkers but also how to speak to potential clients or customers dealing with the stress of vehicle damage or disrepair. As an individual who is open and receptive to conversations, you can use your communication strengths to set others at ease in paint and body school.


    1. I look for creative solutions to mechanical problems.

As an open-minded person, you question the status quo. You look for new ways to solve old problems. You are not afraid to try something unique or think outside the box. New tools and technology motivate your strong work ethic.


These qualities are valued in auto body training. While some repair techniques are tried and true, others evolve over time as software, technology and equipment change. As a person who embraces new ideas, your attitude can help auto body jobs run smoothly for all parties involved—from painting and welding to rust removal and more.


    1. I like learning about tools and technology.


You enjoy hands-on work that requires tools. You might have an interest in machinery, technology or other equipment. When something goes wrong, your first instinct is to plot a plan to fix it—including what you’ll need to get the job done. You’re confident that with the right supplies, you can tackle any challenge.

In auto body repair school, students use specific tools for specific jobs. As a student, your passion for tools can take you to the next level as you learn to use plasma cutters, hydraulic jacks and plastic or glass repair tools. A variety of tools help auto body tradespeople repair structural and cosmetic issues, such as dented doors, bumpers and rust spots.

    1. I tackle projects with precision.


You pride yourself on your attention to detail. You might make mental checklists or remember faces years after meeting people. If given enough information, you can see patterns easily and understand the big picture—a trait that has helped you in school, at work or in your personal life.


Individuals in the auto body repair trade focus on intricate details. When a car is damaged in a collision or distressed due to age, auto body workers inspect the vehicle closely to draw precise conclusions about the car’s condition. To ensure a car is safe to operate, workers in the auto body repair industry draw on their skills for precision and detail—from cost estimates to sanding, finishing, aligning and painting.


If you are interested in learning entry-level auto body repair skills or starting trade school classes, explore our Auto Body Repair program and schedule a tour online today.


*Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.

Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.

HVAC tradesperson uses AC training to check equipment

4 Signs an HVAC Career Path Is for You

Is trade school the right choice for me? Do my interests line up with a specific trade? I think I’m interested in HVAC training, but how do I know if heating and cooling school is the right path for me?


If you are considering taking your education, skills and knowledge to the next level by going to a trade school, you have probably asked yourself these questions. Individuals interested in a future in the heating and cooling trade often wonder if their personality, interests and skills are a good fit. As you weigh your options and plan for the future, consider these indicators.


  1. I am a reliable worker.


    You are a dependable person who understands everyone plays an important role. Family, friends, coworkers and supervisors trust you to work hard and fulfill expectations. People know you will follow through with what you say you will do—whether it is a small request or an important appointment.


    These qualities help students studying the HVAC trade complete their work. For example, if an air conditioning unit stops working in the middle of the night, homeowners and building managers want a trustworthy individual with the skills and knowledge to resolve the problem right away.


  3. I like solving problems.


    You are a technically minded person—which means you approach a problem by locating patterns and efficiencies. You may prefer to create a system or routine when you want to be successful with work or school. Following a process gives you control over challenges, and you often break a project into smaller parts because you want to see how things work.


    In HVAC school, you can use this trait to your advantage. Heating, cooling and refrigeration systems have a web of inner parts, and students learn how and why things work to produce cold or hot air. When one of these important systems breaks or malfunctions, an individual in the HVAC trade is often the first person on the scene. Students who are technically minded are prepared to examine a control panel and locate patterns to complete important repairs.


  5. I enjoy an active lifestyle.


    You like staying active—whether you are spending time with family and friends or learning hands-on in the classroom. You are the type of person who does not mind taking a walk or a drive with no destination in mind—as long as you are going somewhere, you are happy. A traditional desk job sounds a little boring to you, and you think you want a future that requires working on your feet.


    People in the HVAC trade spend time driving to job sites, working with their hands and maybe crouching into tight spaces to assess and service heating, cooling or refrigeration equipment. This active role calls for individuals to be comfortable moving on their feet for periods throughout the day.


  7. I like helping people understand things.


    When you know how something works, it is easy for you to teach others to be successful with it, too. Your knowledge and passion for a topic—such as cars, cooking, or movies—sets you apart from others. You are friendly and approachable, and you feel comfortable talking to strangers.

    Individuals in the HVAC industry interact with many people throughout the day—and they are often answering important questions about their trade, skills, knowledge of various equipment, or why a replacement part is necessary and how it will improve an overall system. Homeowners, contractors and business managers want to understand what a red flag looks like—and an HVAC tradesperson is responsible for explaining various elements about a furnace, air conditioner, refrigerator or other appliance. Strong communication and patience help make these interactions successful.

If you are interested in learning entry-level HVAC skills or starting trade school classes, explore our A/C and refrigeration program and schedule a tour online today.

*Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.

Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.

Individual in the plumbing trade uses plumbing products to repair bathroom fixtures

3 Plumbing Industry Trends for 2019

For centuries, plumbing has improved hygiene and provided clean water to homes and businesses. Though the industry isn’t new, plumbing continues to evolve as modern technologies change the way water is delivered, heated, pumped and stored. New plumbing solutions benefit homeowners, business owners and hard-working tradespeople in the plumbing field.


Here are three bathroom trends in the plumbing industry to keep in mind, whether you are just starting technical school plumbing classes or brushing up on the latest plumbing news.


More Concerns About Aging Pipes

In America, some pipes are 150 years old. Iron and steel—traditional materials for plumbing and waste water pipes—make up nearly two-thirds of municipal water pipes according to the New York Times. When water sits in older metal pipes, chemicals used to treat the water can break down the pipe and contaminate the water. Although outlawed by Congress, very old pipes still lurk inside older homes and infrastructure. Many individuals avoid lead exposure in their drinking water by replacing old pipes in their home with lead-free alternatives.


To do this, many people turn to trade workers who have the knowledge and skills to replace pipes and maintain plumbing systems. As older pipes continue to age in America, people will depend on individuals in the plumbing trade for guidance and expertise.


Popular Plumbing Fixtures

In addition to updating old pipes, homeowners are turning toward sleeker and smarter plumbing fixtures in their bathrooms and kitchens. Plumbers can be aware of the latest designs and upcoming trends they may encounter in homes or businesses, such as:


  • Single-handle faucets – These user-friendly fixtures allow a single touch to start or stop the flow of water. Plumbers may repair or install these faucets in kitchens or bathrooms.
  • Drop-in sinks – Large, single-bay sinks make it easy to wash pots and pans. Plumbers should be aware that drop-in sinks, while convenient for homeowners, reduce under-sink space and make for smaller repair areas.
  • Freestanding bathtubs – Different from antique clawfoot tubs, freestanding tubs are typically offered in unique, sleek shapes and are often installed in the center of the bathroom.


No matter what fixtures or appliances are in style, plumbers can take extra care to protect bathroom designs from damage during an installation or repair. Quality workmanship and attention to detail are signs of a skilled plumber.


Plumbing Trends for Green Living

Homeowners and business owners alike are becoming increasingly environmentally conscious. More consumers make choices that directly affect the planet and their wallets. Some traditional plumbing systems create unnecessary energy and waste. Here are several increasingly popular plumbing solutions that leave a lighter footprint on the planet.


  • Solar-powered water heaters
  • Touchless and tankless fixtures
  • Variable-flow toilets and showers
  • Low-flush toilets
  • Constant water pressure systems
  • Whole-house water filtration systems
  • Faucet-flow reducers


Although some green plumbing systems are more expensive up front, they can help consumers save on utility bills over time. The more aware tradesmen and tradeswomen are about plumbing fixtures, the better they are able to diagnose, install, repair or maintain plumbing systems that offer efficient benefits.


Stay up to date with the plumbing trade, trends and industry news by exploring other plumbing topics on the Apex Technical School blog. To learn more about plumbing classes at trade school, schedule a tour of our campus where you will talk with friendly admissions staff and observe a plumbing class.


Interested in learning more about plumbing? Explore the Plumbing and Pipefitting program at Apex.


*Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.

 Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.

plumbing versus electrical promo image

Trade Programs: Plumbing & Pipefitting vs. Electrical

Plumbing has delivered clean water and protected people from disease for centuries, starting with the Roman Empire. Today, plumbing allows people to enjoy the comforts of daily living, including hot water, showers, toilets, dishwashers and washing machines. Similarly, electricity helps power many plumbing appliances in homes, as well as refrigerators, computers, air conditioning systems and lighting. Without these technological advancements—and the skilled tradespeople who install, repair and maintain them—modern living would be very different.

At Apex Technical School, we offer training programs focused on helping students build technical knowledge and skills in plumbing and electrical. Interested in learning which program is a good fit for you? Discover the difference between these programs in the infographic below.

Plumbing and pipefitting versus electrical trade program infographic

*Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.


Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.


What Are the 7 Trade School Programs at Apex?

There’s no one size fits all when it comes to school. Some students attend a traditional college to earn a two- or four-year degree. Many others discover a combination of knowledge, skills and technical training is the right path for them. A vocation education at trade school provides students with a variety of positive benefits. If you’re interested in attending trade classes, keep reading to learn about our programs.


Automotive Service Repair

At Apex, the automotive service repair program helps students learn to repair vehicles, help vehicles operate safely and get specialized training for an entry-level position. It provides a foundation of technical skills students use to evaluate mechanical systems and make repairs, as well as:


  • Fix and maintain the inner parts of the vehicle
  • Test major components when a vehicle breaks down
  • Work on engines, transmissions and brakes
  • Perform basic car care and maintenance, including oil changes


Students spend time in the classroom and shop where instructors incorporate diagnostic procedures, proper tool usage and much more. Auto mechanic classes are often a good fit for individuals who enjoy hands-on learning and have a passion for cars. Discover four signs auto mechanic school is right for you.


Air Conditioning, Refrigeration, Appliance/Controls

This vocational program focuses on teaching skills related to repairing and troubleshooting air conditioners, refrigeration systems, electrical control panels, major home appliances and gas-fired heating systems. Students in the HVAC program at Apex learn how to:


  • Use the basics of electricity for installation, service and maintenance
  • Repair and maintain domestic and commercial units
  • Learn about cooling towers, piping and ductwork
  • Follow codes and safety practices


HVAC training classes include both basic and advanced segments where students split their learning time between the classroom and shop. Interested in the HVAC field? Learn more about


Auto Body Repair

From preparing a car for body repairs to learning how to weld and retexture plastic, students in this vocational program train to enter the auto body repair industry. Students not only learn to improve a vehicle’s appearance but also:


  • Work on collision repairs, windshields and window glass
  • Fix structural, safety and cosmetic issues, such as dented doors and bumpers
  • Use paint and welding techniques
  • Restore older cars damaged by rust and age


In auto body repair classes, experienced instructors teach students techniques for fixing everything from minor to major auto collision damage. Explore the differences between the


Combination Welding Technology

Apex’s trade classes give students hands-on experience and teach a range of welding knowledge. Students learn techniques for welding repair and maintenance as well as how to use some forms of advanced welding equipment. Apex instructors focus on helping students:


  • Read blueprints and interpret welding symbols
  • Perform the four major welding processes, including SMAW, GMAW, GTAW and FCAW
  • Weld plates and pipes in multiple positions


Welding has been used for centuries to join two pieces of material together and continues to be a viable modern career option. Interested in learning if combination welding classes might be a good fit for you? Here are three signs you should consider welding training.


Electrical and Advanced Electrical

This trade school program prepares students to perform a variety of electrical tasks—from reading circuit diagrams and installing wiring for lighting to learning about green energy systems and more. Apex students learn with instructors and peers, study theories in the classroom and get hands-on experiences in the shop. Students training in the electrical program learn to:


  • Use basic tools and equipment to repair electrical conductors and components
  • Perform splices, bonding and grounding
  • Install circuit breakers, fuses and wiring
  • Install security systems, fire alarms, intercoms and other electronic systems


Electrical and advanced electrical classes span six segments and help students earn 900 hours of trade school training. Interested in exploring a bright future in the electrical field? Discover four reasons the electrical trade could be the path for you.


Construction and Building Skills

Individuals in the construction and building trade program touch upon a variety of skills—ranging from carpentry and electrical familiarity to plumbing, kitchen and bath knowledge. These tradesmen and women use their hands-on skills to:


  • Troubleshoot and repair electrical boxes and fittings
  • Frame windows and doors
  • Install light fixtures, wiring and countertops
  • Use power tools and plumbing blueprints


At Apex, students prepare to enter the construction field by taking six segments of carpentry and building skills classes, as well as learning to build a model house in the shop. Think you might be a good fit? Explore five signs a construction career path is right for you.


Plumbing and Pipefitting

Students in this vocational program learn how to install water heaters, water supply and waste disposal systems found in private kitchens and bathrooms. They also learn the basics and practice real techniques, including:


  • Assemble pipe sections, tubing and fittings
  • Locate leaks and repair pipes, fixtures and drainage systems
  • Follow blueprints, codes and safety specifications
  • Use a variety of hand and power tools, levels and other materials


Plumbing classes give students the opportunity to learn how to find the source of a problem, as well as what it takes to solve the problem. Wondering if you’re ready to pursue the plumbing trade? Here are four signs a plumbing career could be a good fit.


*Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.


Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.

An Apex Technical School student parent and his family stack their hands together in a pile

Going to Trade School: Back-to-School Tips for Student Parents

Single parents in college or technical school often wonder how they can accomplish their education goals with a family at home. While it may seem difficult, it’s possible to manage a family, work and trade classes. Here are three back-to-school tips for parents in trade school.

  1. Schedule your tasks.

    • Use a calendar. It can be on your refrigerator, mobile device or in a small planner. For example, if trade school class starts at 9 a.m. and you must finish studying and drop your son off at child care—make sure you schedule “studying” and “traveling to child care” on your calendar. Not only will you be on time for class, but you’ll take advantage of the quiet morning hours to study before your son wakes up.
    • Block out distractions. If you must study safety codes for your plumbing or electrical class, make sure you can devote time, energy and concentration to the task. Some students prefer to study as soon as they get home from class, when the material is fresh in their minds. Whenever you study, make sure you channel your attention on only one task. Ask family members not to disturb you. Leave your mobile phone in another room.
  2. Prep meals.

  3. Imagine this: You’ve just finished a class in the auto body repair shop. You learned new techniques for repairing rust on old vehicles. You’re proud of yourself, but now you’re tired. It’s time to go home and relax with your daughter who is staying with you for the weekend—except, you forgot about dinner.

    • Fix healthy meals for the week. Meal prepping can be a smart way to eat healthier foods because you won’t have to pick up fast food every night. Use an hour of your free time for prepping meals: slice vegetables, cook rice or pasta in bulk and sauté chicken that you can add to different meals throughout the week.
    • Save time and money. Eating prepared meals at home saves dollars at the grocery store and fast food restaurants, since it means you’ll be able to grab prepared food right from the refrigerator. It also gives you more time in your busy schedule to spend with family, studying or working.
  4. Ask for help.

  5. Sometimes, it seems like you must accomplish more than you’re capable of accomplishing. Maybe it’s difficult to juggle work, school and being there for your family when they need you. Or maybe time management is easy for you, but you’re afraid of falling behind in your trade classes because you don’t understand a new technique.

    • Talk to your support system. The people you surround yourself with are there to help you—whether that includes family, friends, trade school instructors, your religious community or other students in your classes. Asking questions helps everyone learn, grow and get better. When you’re learning something new—like a hands-on technical trade—you’re bound to discover your strengths and weaknesses. Rely on your support system to help you improve and finish strong.
    • Contact us. Our friendly representatives at Apex can answer your questions, from financial aid for trade school, to job placement assistance and other services offered at the school. Need help or have a question? Contact us today for more information.


*Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.


Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.

Automotive Service Repair vs. Automotive Body Repair

Automotive Service Repair vs. Auto Body Repair

Since the debut of the Model-T Ford, cars and trucks have transformed America, helping people travel from point A to point B. Today, with more than 253 million vehicles on the road, auto mechanics and auto body technicians have never been more important. These skilled individuals help maintain vehicles, whether they perform routine care under the hood or fix damaged cars after an accident.

At Apex Technical School, we offer two auto training programs focused on helping students build technical knowledge and skills. Interested in learning which program is a good fit for you? Discover the difference between two auto programs at Apex Technical School in the infographic below.

Is Apex Right For You? Infographic

*Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.


Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.


Tools used in electrical training courses and a burning light bulb on a wooden table

Is the Electrical Trade the Path for You?

Is technical school my next step? Should I turn my interest in electrical school into a reality? How do I know if electrical training courses are a good fit for me?

These questions are common when you’re determining how—and where—to pursue your education. If you’ve always had an interest in electricity or wondered how it works, consider what you like about the industry. Next, imagine yourself as an individual in an entry-level electrical position. Do your interests, personality traits, and strengths make you a good fit for the trade? Explore four indicators to learn more about yourself and the electrical trade below.

    1. I’m persistent when projects get tough.

You’re a patient person who knows how to keep your cool. When team members, classmates or friends get frustrated, you’re the strong voice in the group with a plan. Your knack for endurance has helped you through hard times. You’re capable of finding the silver lining in tough situations because you trust yourself to solve problems.


In the electrical trade, persistence helps you stay focused. Electrical repairs require concentration, attention to detail, and adherence to best practices learned in electrical training courses. Your determination is an essential trait that makes you an asset for jobs that need maintenance or installations because these jobs can be time consuming and complex.


    1. I’m a dependable person.

As a family member, friend, student and co-worker, you are trustworthy. People know they can count on you because you honor commitments. Not only do you hold others accountable but also yourself. You don’t wait around—you take initiative and jump into a project or situation with confidence. If you make an error, you own up to it. Next time, you’ll incorporate what you learned from that mistake.


Individuals in the electrical trade must be reliable. Customers, managers, and co-workers depend upon electrical tradespeople to get the job done right. If a job is performed incorrectly, it can result in repairs that do not meet code standards or installations that cause dangerous electrical fires. Dependable people working in the electrical field take their skills seriously and use them to maintain safety and ethical standards.


    1. I learn by doing and working with others.

Do you learn best in a hands-on situation? Many individuals in the electrical trade are tactile learners. This means they thrive by getting their hands dirty and remember things by physical movement. You prefer to touch, move, draw, or plot out information as you learn. You feel like you learn more when you’re in a lab or shop compared to a traditional classroom.


People in the electrical industry start by learning from skilled instructors with on-the-job experience. Because you’re a hands-on learner, you can learn new things by trying something yourself several times or observing others completing a task. Once you’ve learned the basics, you can use this skill throughout your time in the industry because new methods, electrical tools, and technology require electrical tradespeople to be lifelong learners.


    1. I’m a critical thinker with a strong memory.

You’re a logical person who considers all sides of an argument or problem before rushing to a conclusion. You’re clear, rational, and open-minded in how you approach life and work. As a student and employee, you don’t take information at face value; instead, you ask questions if you don’t understand. When you uncover the facts, you try to commit them to memory.


Individuals working in the electrical industry are required to remember best practices and uphold important safety codes. The National Electric Code is the manual that all electricians rely on in the field. Critical thinking skills and a steadfast memory can help set you apart and make you a strong candidate for pursuing a future in the electrical trade.


There are many exciting trade industries and countless reasons to consider a technical school to continue your education. If you’re interested in learning how to learn entry-level electrical skills or start trade school classes, explore our electrical and advanced electrical program or schedule a tour online today.

Want to pursue your interest in electrical? Explore the Electrical and Advanced Electrical program at Apex.


*Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.

Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.


Two trade school students work on the rear end of car in the Apex auto body shop

4 Cars Turned into Automotive Art

Cars come in all shapes and sizes and can be as different as the people who drive them. Some people view cars as a blank canvas, and increasingly, mechanics, artists and engineers have transformed their vehicle into a stunning work of art.


Car body art got its start in the 1960s when hippies began customizing vehicles with peace signs and psychedelic patterns. Today, car enthusiasts can find customized cars in every city and around the world. If you enjoy automotive body repair and car artwork, check out these four creative car transformations.


    1. Utility Kinetic Insect

The Utility Kinetic Insect, called UKI, is a unique machine with pulsing wings, a surround sound system, LED lights, and all-terrain tires. Make Mob, a group of engineers and creative thinkers constructed UKI at their workshop in Melbourne, Australia. The team was inspired by Mad Max, nature, circus equipment, and bugs found in the Australian outback.


UKI sits on a modified four-wheel-drive chassis and runs on electric power. While the mutant vehicle only reaches speeds of approximately six miles per hour, UKI has an impressive sound mixing desk and has traveled to festivals such as Burning Man in 2017.


    1. Swamp Mutha by Ann Harithas

Artist Ann Harithas wanted to create a symbol of the swamps and bayous where she lived on the Gulf Coast. The 1982 Chevrolet Monte Carlo features gold-rimmed tires, a gold body, and a hand-painted scene showcasing swamp creatures such as alligators, rats, and ducks. Harithas also added deer antlers, skulls, and hand-crafted snakes to the Monte Carlo’s roof.


Part of the permanent collection at the Art Car Museum in Houston, Texas, Swamp Mutha is an example of visual appeal and self-expression. Mechanics, artists, engineers, kids and thousands of others travel to see it each year.


    1. Nokturnal Car Club’s Custom Creations

Hector Esquivel, president of the Los Angeles, California chapter of the Nokturnal Car Club, began building custom cars when he was just 15 years old. Over the last four years, he has spent about $90,000 on his personalized yellow truck. His organization continues to grow each year with more than 250 members and 28 chapters across the United States, Europe, and Asia.


In addition to transforming regular cars into show-stopping rides, Esquivel and a few others crafted a custom golf cart with 14-inch rims, airbags, air ride suspension, LED lights, TVs, and an Xbox 360 in the back for passengers. The golf cart was a way for him to challenge himself and create something new and exciting with his son in his spare time.


    1. BMW 3.0 CSL by Alexander Calder

The first car in BMW’s series was entered in the 1975 “24 Hours of Le Mans,” a race in France. Before it raced, artist and sculptor Alexander Calder modified the now-famous car with intense colors on the hood, sides, and roof. Still impressive by today’s standards, the BMW 3.0 CSL features:


      • Six-cylinder inline engine
      • Four valves per cylinder
      • Twin overhead camshafts
      • Displacement: 3210 cm³
      • Power output: 480 bhp
      • Top speed: 291 km/h

Calder’s painted masterpiece raced for seven hours before a defect forced it to retire. It’s now on display in London for car enthusiasts and BMW fans to enjoy.


    1. Learn Automotive Repair Skills at Trade School

While some people transform their cars as a hobby, many workers in the auto repair industry use their skills to help repair cars after serious collisions or minor damages. If you’re interested in learning more about auto body paint and refinishing techniques, computerized paint-mixing systems or laser measurement technology, explore our auto body repair program.


If you’re interested in automotive mechanics—including car parts removal and inspection, energy, electrical circuits, manual and automotive transmissions, fuel systems and air conditioning repair—check out our automotive service and repair program.


Have questions? Contact us or schedule a tour online to visit our automotive classrooms and shop.


*Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.


Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.

Plumbing equipment used by technical school students to learn plumbing trade

4 Signs a Plumbing Career Pathway Is a Good Fit for You

Should I pursue my goals of becoming a skilled tradesman? Is the plumbing industry right for me? How do I know if I should follow the plumbing career pathway?

It’s normal to ask these questions as you consider the next steps in your career. Perhaps you’ve repaired plumbing or pipefitting work in your home, but you don’t know if you should pursue plumbing training. As a first step, it’s helpful to evaluate what you like about the field and how to take advantage of your personal characteristics. Consider these indicators as you learn more about the plumbing trade.

  1. I’m a problem-solver.

  2. You’re a curious person with a knack for working with your hands. You like the challenge of solving puzzles, problems and collaborating with a group. Even if you’re unsure at first, you’re confident you can figure out most problems. You are both practical and creative when it comes to finding solutions.


    Tradespeople in the plumbing industry need to think efficiently. Installations and repair jobs require plumbers to draw on their knowledge and skills of the trade. Because there are many types of fixtures, faucets and pipes, plumbers must know how to handle a variety of tools, read blueprints and find solutions for many systems and appliances.


  3. I take pride in being reliable.

  4. Your friends, family and coworkers, know they can depend on you to follow through, show up on time or finish a project. You value hard work in others and you expect it from yourself.


    Workers in the plumbing trade need to demonstrate reliability to customers and business partners. Some individuals are responsible for several house calls per day, commercial plumbing projects and installs and repairs. A tradesperson who is consistent and trustworthy is an asset to the plumbing industry.


  5. I like to learn and test new things.

  6. You’re interested in the mechanics of how things work. You’re a hands-on person who prefers to troubleshoot an issue, take your time finding the right solution and complete a challenge the right way—and even if the right way takes longer, you never cut corners. You enjoy assembling pieces and parts to find out how things work together.


    In the plumbing trade, workers often repair a variety of pipes and appliances—some new and some old. While homeowners may do their best to fix a plumbing problem, a skilled plumber can recognize an unsafe repair job, locate the correct tools and materials and quickly correct the issue. To stay knowledgeable in their trade, plumbers must keep current on techniques, tools and housing and building codes.


  7. I don’t mind small spaces.

  8. Individuals in the plumbing industry often find themselves in confined spaces such as crouching under a sink, working in tight corners, and maneuvering around appliances. These areas may be uncomfortable at times and require individuals in the plumbing trade to maintain good health. In addition, manual dexterity and physical fitness help plumbers minimize their risk of injury.

    There are many exciting trade industries and countless reasons to consider a technical school to continue your education. If you’re interested in learning about our trade school classes, explore our plumbing and pipefitting program or contact Apex today.

*Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.

Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.

Gears with inspirational words, such as skills, knowledge and growth

Professional Work Habits of a Skilled Tradesperson

In addition to skills and on-the-job training, a successful tradesperson has a strong work ethic and a professional attitude. Good professional work habits benefit even the most experienced technicians. While you learn skills to enter the trade field, start practicing good work habits while you train or apprentice. On-the-job training exposes you to real-life work situations, testing your skills and professionalism.


No matter where you are in your education or training, use these four professional work habits of successful tradespeople and develop a strong work ethic.

  1. Problem solving skills
  2. In the classroom and at the jobsite, get in the habit of presenting solutions in addition to problems. Offering solutions to problems or issues shows critical thinking and leadership. Problem solving helps you earn trust from your colleagues and superiors. When you solve problems, be sure to observe, listen and ask questions so you fully understand the issue.


    Consider offering a few solutions when working within a team or directly with customers. Take advantage of more experienced teammates or supervisors by asking for their advice on solutions. Gain additional knowledge and understanding from others that can help you solve similar problems in the future.

  3. Continuous learning and education
  4. Keep your skills sharp and gain more experience by participating in continuous learning. As you continue to learn valuable skills for your trade or industry, you learn more techniques and get familiar with new technologies. While working on a jobsite, don’t be afraid to say, “I don’t know.” Learn from others by asking for help from teammates or supervisors.


    A desire to learn shows passion and a commitment to doing good work. Look for new or additional learning opportunities to develop or practice skills. Consider asking instructors to connect you with industry leaders or local trade organizations. Gain access to new opportunities or learning workshops by getting involved with professional trade or networking organizations.

  5. Be kind
  6. Kindness goes a long way in every trade industry. As a skilled tradesperson, interacting and working with customers may be a large part of your job. Treat every customer, teammate and supervisor with respect and kindness. Good customer service tends to play a huge role in every trade field. Polite, clear communication helps build trust with customers, managers and project owners.


    If you find yourself working within a team, avoid gossiping on the job─even on breaks. A positive attitude lets others see you as a dependable team player. Keep personal issues at home, even if you become friends with your colleagues. Don’t let issues outside of work affect or influence your job.

  7. Stay organized
  8. Get in the habit of writing or recording dates and information. Learn an organization system or create your own way to stay organized using a calendar, a planner or a mobile app. Even if you use a company- or job-provided time tracking or project management system, keep your own records to prevent clerical errors.


    Keep your equipment organized, as well, by properly storing and cleaning tools after using them. Have tools ready to use at the start of each day or before starting a project. Good organization preserves and protects your equipment, so you can get the most use out of your tools.


Interested in technical school training? Learn more about the trade programs at Apex Technical School.

*Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.

Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.

Red and blue manifold gauges on an HVAC system for small spaces

What Is the A/C & Refrigeration Trade?

Individuals in the A/C and refrigeration trade keep buildings, offices, stores and homes cool and comfortable. Heating and air conditioning systems control the temperature, humidity and overall air quality. By providing a climate-controlled environment, refrigeration systems make it possible to store and transport food, medicine and other perishable items.

In America, most homes and buildings use some form or system for air conditioning or refrigeration. Additionally, the popularity of air conditioning systems worldwide continues to grow with the development of new technology and products.

Interested in pursuing HVAC technical training? Read more to learn what to expect as an individual in the HVAC industry.

  1. What does an individual in the HVAC trade do?

    In the air conditioning and refrigeration trade, technicians may install, maintain and repair industrial, commercial and residential HVAC systems and component parts. To install HVAC systems, technicians mount or place system components based on drawings or verbal instructions. Then, the technicians assemble and install the refrigeration or air conditioning system. HVAC technicians calibrate controls on the unit, which includes wiring, and test that the system works properly.

    Residential or commercial HVAC system maintenance includes checking system parts, lubricating moving parts and monitoring the refrigerant charge. Additionally, to repair a HVAC system, a technician diagnoses the problem and fixes the unit by replacing or repairing controls, electric wiring or other parts. HVAC technicians may also repair heating equipment and troubleshoot gas-fired equipment.

  2. Where does an HVAC tradesperson work?

    An HVAC technician repairs a rooftop A/C unitRefrigeration and air conditioning technicians usually work for companies that install and service A/C or HVAC systems. Some refrigeration and air conditioning technicians are self-employed.

    As an air conditioning and refrigeration tradesperson, expect to work in homes, schools, stores, hospitals, office buildings, or factories. Technicians often work in hot and cold environments depending on the type of unit, building or repair. Working in small spaces, outdoors, on rooftops and during irregular hours is common in the A/C and refrigeration industry.

  3. How long is HVAC school?

    Depending on your enrollment, an A/C and refrigeration program generally takes between six months and two years to complete. When considering HVAC programs and certification, look for trade schools that are licensed by the state. You might also want to see if the school is accredited.

    At Apex, students can spend as little as 7 months in the program. Learn more about enrolling in trade school at Apex Technical School.

  4. What HVAC tools does a tradesperson use?

    Common tools used in the refrigeration industryIn the A/C and refrigeration industry, technicians use a variety of tools to install, maintain or repair residential and commercial cooling systems or units. For general HVAC work, expect to use these tools: an electric drill, a tape measure, pliers, wrenches, screwdrivers, ladders, and electrical testers. Some common air conditioning tools for installing or repairing units: a tubing cutter, refrigeration gauges, and a vacuum pump.

  5. How do I gain HVAC skills in New York?

    New York offers opportunities for skilled A/C and refrigeration technicians. A large population and a temperate climate has need for heating and cooling system installation, repair and maintenance. If you’re interested in gaining entry-level skills for the HVAC industry, enroll in a trade school, like Apex Technical School


    At Apex, students in the air conditioning and refrigeration program develop skills to work on:

    • Major home appliances
    • Basic domestic and commercial refrigeration systems and air conditioning
    • Advanced commercial refrigeration systems and air conditioning


Interested in pursuing a path in the refrigeration industry? Learn more about the HVAC trade and training program by visiting the Apex Technical School’s website.


*Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.

Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.

Welder in training working on a piece of metal

3 Signs You Should Consider Welding Training

Welding joins two pieces of metal together using fire and pressure. The process began in prehistoric times, and methods have evolved the welding process throughout history. Today, there are many types of welding careers, including combination welding. Find out if your personality and natural talents lend themselves to a welding career path with the following indicators.

  1. I like to solve problems.

    You enjoy learning how things work, especially when it’s a challenge. You don’t shy away from a problem and will do what it takes to find a solution. You’re ready to adapt to changing situations, and you feel a sense of accomplishment when you crack puzzles others can’t solve. Your knack for logical thinking has always been one of your strengths.


  2.  I like working on projects alone.

    You believe it’s important to come to work prepared and on time—even when no one is looking. You’re independent, responsible and motivated. You can work with little to no supervision. Because you take initiative, people trust you to get the job done right. You often receive praise for your high-quality work. While you prefer working on your own, you’re a strong team player and can motivate others to do their best work, too.

    There are several types of welding careers; many welders work on bridges, ships or in manufacturing plants. They work in hands-on, solitary conditions and are responsible for controlling their welding tools and equipment. Independence and self-motivation are key for students pursuing welding training.

  3.  I like to learn new things and improve my skill set.

    Sometimes you find yourself taking something apart to see how it works or Googling the answer to a technical question that pops into your head. At work, you ask tough questions because knowing the answers makes you feel more confident.

    Because a welder’s job involves inspecting, trimming and soldering complex metal objects, welders must pay close attention to detail. While welding school provides a foundation of knowledge, tradesmen and women typically learn new machines and techniques throughout their careers in order to meet evolving safety standards and technologies.

Consider technical training opportunities for welding schooling in New York by exploring our Combination Welding Technology program.

*Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.

Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.


An auto repair student with greasy hands trains for a skilled trade job

Famous Tradesman Mike Rowe on “Dirty Jobs” and Trade School

As a TV personality, Mike Rowe is best known for hosting “Dirty Jobs,” a series that dives deep inside messy, blue collar jobs and showcases the skilled workers who perform them. On TV, Rowe shines a light on skilled trade jobs, and he’s an advocate for skilled labor in his personal life, too. Learn why this famous tradesman believes a four-year college degree isn’t for everyone—and why skilled trade jobs are a practical alternative.


A Focus on Skilled Trades

Rowe provides constant warnings about America’s growing skills gap. But what is the skills gap, and how does it affect the country? The skills gap is defined as a shortage of workers trained for blue collar jobs. Numerous potential workers don’t know about the benefits of learning a skilled trade.


Why? Many high school graduates are encouraged to pursue a bachelor’s degree at a four-year college or university, while technical training opportunities remain unfulfilled. According to Rowe, we should not “encourage the same path for everyone.” This not only harms the economy but also students who would be happier or more motivated at trade school.


In an interview with Business News Daily, Rowe said he met countless happy laborers on the road for his TV show. “I met way more entrepreneurs than I ever would have thought and came across way more success than I ever thought we would encounter,” said Rowe.


Rowe, who started “Dirty Jobs” in honor of his grandfather, has committed his life to closing the skills gap by helping passionate people find hands-on training and skills for the workforce. He also started mikeroweWORKS, a nonprofit organization that offers scholarships for students attending trade school.


Apex Works to Supply America’s Trade Skill Needs

Like Mike Rowe, Apex values technical training. We offer seven programs focused on providing quality, hands-on training and marketable skills for entry-level employment. Students spend at least 50 percent of their time in the shop, gaining hands-on experience with our tools and equipment in programs such as welding, electrical and advanced electrical, auto body repair and more.


To find career training you’re passionate about, explore our programs. Questions? Contact us today.


*Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.
Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.


An individual in the HVAC industry repairing a refrigerator with various tools

Air Conditioning History and HVAC Industry Growth

Man’s attempts to stay cool and comfortable during extreme summer heat are well documented. Historical evidence shows attempts by several individuals to control indoor temperatures. For example, the Ancient Romans utilized the aqueduct system to circulate cool water through the walls of their homes. The emperor Elagabalus built a mountain of snow in the garden next to his villa to keep cool during the summer.


1800s: Cooling Devices and Innovations


Throughout history, individuals used hand-held fans to create a breeze and stay cool. A Chinese inventor built the first room-sized, but hand-powered, rotary fan. Another innovation in cooling indoor spaces included building homes with windows facing away from the sun. Builders also installed ‘wind towers’ onto large buildings to catch and circulate the breeze. And to be comfortable in the sweltering heat of Washington, D.C., President Garfield used an awkward device to blow air through cotton sheets doused in ice water.


1900s: Developments in Electricity and Motors

The development of electricity and motorized power led to air conditioning and the HVAC industry as we currently know it. Using alternating current motors, Nikola Telsa invented oscillating fans. In 1902, Willis Carrier invented the first air conditioning system. Originally intended to control humidity in a printing plant, Carrier’s mechanical unit sent air through water-cooled coils to produce cold air. In 1922, Carrier invented the centrifugal chiller, adding a central compressor and reducing the size of his industrial refrigeration system.


In 1925, the Rivoli Theater introduced air conditioning to the public. The air-conditioned theater started the summer blockbuster tradition, as people went to see movies to escape the heat. Starting in the 1930s, air conditioning spread to department stores, rail cars and offices. In 1945, Robert Sherman invented a portable, in-window air conditioner that cooled, heated, humidified, dehumidified and filtered the air. Eventually, residential homes and buildings started adding air conditioning and HVAC units. According to the Carrier Corporation, 10 percent of homes had air conditioning in 1965.

Today: HVAC Market and Products

Many different types of units exist in the HVAC market. Price, functionality and purpose tend to determine the type of AC or HVAC unit installed. The type of building being cooled also factors in to what type of AC or HVAC unit is used. Learn about the most common types of air conditioning systems below.

Domestic Air Conditioners

  • Room Air Conditioners: Room air conditioners mount in windows or through walls to cool a room while the compressor is located outside. Room air conditioners are sized to cool just one room, so many may be required for a whole house.


  • Ductless Mini-Split Air Conditioners: Mini-split systems use an outside compressor/condenser and indoor air handling units. To be cooled, each room or zone uses its own air handler. Each indoor unit connects to the outdoor unit via a conduit carrying the power and refrigerant lines. Indoor units typically mount on the wall or ceiling.


  • Central Air Conditioners: Central air conditioners cool an entire house. In each system, a large compressor unit located outside drives the process; an indoor coil filled with refrigerant cools air that is then distributed throughout the house via ducts.


Commercial & Industrial Air Conditioners


  • Split System Air Conditioners: Small commercial buildings use single split air conditioning systems. They provide heating and cooling to individual rooms, making them ideal solutions for small offices, server rooms, shops, and cafés.


  • Multi-split System Air Conditioners: Multi-splits work the same way as single splits but connect indoor units to one outdoor unit. Places like restaurants, offices, doctor’s surgeries and shops frequently use multi-split systems.


  • VRF or VRV Air Conditioning: VRF stands for variable refrigerant flow, while VRV stands for variable refrigerant volume. Medium to large applications, including hotels, retail spaces, larger officesand mixed-use buildings use VRF/VRV air conditioning. Efficiency, reliability and controllability make these systems capable of meeting larger buildings’ complete heating and cooling requirements.


Future: Advancements in the HVAC Industry

In America, most homes and buildings have some form of air conditioning. Advancements in technology make air conditioning and HVAC units widely used. Consider HVAC and industrial refrigeration skills and repair if you are interested in pursuing a trade career.


The following topics cover the basics of the HVAC and refrigeration industry:


  • Major Home Appliances
  • Basic Refrigeration
  • Domestic Refrigeration
  • Commercial Refrigeration
  • Commercial Air Conditioning
  • Advanced Commercial Refrigeration


To understand more about the HVAC industry, learn about the Air Conditioning and Refrigeration program at Apex.


*Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.

Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs.

A person completing a vocational resume on a wooden table top

How to Write a Resume After Trade School

If you’re on track to meet your graduation goal, congratulations! Finishing trade school and starting a career in the trade of your choice requires hard work—and a polished resume. At Apex Technical School, our job placement assistance team helps you learn how to create a resume you can send to companies as you prepare to pursue an entry-level position. To help you get started, we’ve listed four elements you can add to your new graduate resume.

  1. Education

  2. As you learn how to write a resume, it’s important to accurately and professionally represent yourself. Provide details about where you attended school, including high school and trade or technical school. It’s helpful to cite the dates you attended school because this shows hiring managers the time you’ve spent learning new knowledge and hands-on technical skills.

  3. Part-Time Employment

  4. Many students work part-time while they attend trade school. Plus, learning a trade part time is an excellent way to start a new career without putting your personal life on hold. If you have prior work experience, consider listing the following details on your new graduate resume:

    • Company or organization name
    • Location (city and state)
    • Dates of employment
    • 4–5 job responsibilities
  5. Experience

  6. You’ve worked hard acquiring new skills in the classroom and shop, so include your technical experience with pride. For example, students training for the plumbing trade can include their knowledge of hand and power tools, pipefitting skills and more. Unlike a college graduate’s resume, your vocational resume showcases hands-on learning experiences.

  7. Soft Skills

  8. What are soft skills and how are they different from hands-on technical skills? Soft skills such as personality traits and communication abilities characterize how you approach a job and find success in your work. Incorporate relevant soft skills on your vocational resume, such as:

    • Work ethic
    • Problem-solving
    • Time management
    • Decision-making

    Most employers look for soft skills in job candidates because they prove you have the ability to make decisions, solve problems and create professional relationships with coworkers.

For more help creating your vocational resume, contact our Job Placement Assistance team.

*Apex Technical School and its instructors are licensed by the State of New York, New York State Education Department.

Disclaimer: Apex Technical School provides training for entry-level jobs. Not everything you may read about the industry is covered in our training programs. The school does not guarantee job placement of any student.